Journal Articles

Journal Articles

Journal Articles

2022

  1. B. Shkodra, M. Petrelli, M. A. C. Angeli, A. S. Inam, P. Lugli and L. Petti, "Optimization of the spray-deposited carbon nanotube semiconducting channel for electrolyte-gated field-effect transistor-based biosensing applications". IEEE Sensors Journal, (2022), (doi.org/10.1109/JSEN.2022.3162706)
  2. J. F. Salmerón, M. Vela-Cano, A. Falco, M. A. Rivadeneyra, M. Becherer, P. Lugli, J. Gonzalez-Lopez and A. Rivadeneyra, "Portable Electronic system for fast detection of bacteria lactase fermentation in water samples". Sensors and Actuators A: Physical, p.113486, (2022), (doi.org/10.1016/j.sna.2022.113486)
  3. C. Moraldo, E. Vuille-dit-Bille, B. Shkodra, T. Kloter and N. Nakatsuka, "Aptamer-modified biosensors to visualize neurotransmitter flux". Journal of Neuroscience Methods, 365, p.109386, (2022), (doi.org/10.1016/j.jneumeth.2021.109386)
  4. B. Dudem, R. I. G. Dharmasena, R. Riaz, V. Vivekananthan, K. G. U. Wijayantha, P. Lugli, L. Petti and S. R. P. Silva, "Wearable Triboelectric Nanogenerator from Waste Materials for Autonomous Information Transmission via Morse Code". ACS applied materials & interfaces, (2022), (doi.org/10.1021/acsami.1c20984)

2021

  1. B. D. Abera, I. Ortiz-Gómez, B. Shkodra, F. J. Romero, G. Cantarella, L. Petti, A. Salinas-Castillo, P. Lugli and A. Rivadeneyra, "Laser-Induced Graphene Electrodes Modified with a Molecularly Imprinted Polymer for Detection of Tetracycline in Milk and Meat". Sensors, 22(1), p.269, (2021), (doi.org/10.3390/s22010269)
  2. B. Shkodra, M. Petrelli, M. A. Costa Angeli, D. Garoli, P. Lugli, and L. Petti, “Electrolyte-gated carbon nanotube field-effect transistor based biosensors: principles and applications”. Invited paper, Appl. Phys. Rev. 8, 041325, (2021), (doi.org/10.1063/5.0058591)
  3. F. Catania, H. De Souza Oliveira, M. A. Costa Angeli, M. Ciocca, S. Pané Vidal, N. Münzenrieder, G. Cantarella, “The influence of climate conditions and on-skin positioning on InGaZnO Thin-Film Transistor performance”. Front.Electron. - Flexible Electronics, 2,786601, (2021), (doi.org/10.3389/felec.2021.786601)
  4. Inam, M. A. Costa Angeli, B. Shkodra, A. Douaki, E. Avancini, L. Magagnin, L. Petti, and P. Lugli, “Flexible screen-printed electrochemical sensor functionalized with electrodeposited copper for nitrate detection in water”. ACS Omega, 6, 33523−33532, 2021, (doi.org/10.1021/acsomega.1c04296)
  5. F. C. Loghin, J. F. Salmerón, P. Lugli, M. Becherer, A. Falco and A. Rivadeneyra, "Optimization of a Handwriting Method by an Automated Ink Pen for Cost-Effective and Sustainable Sensors". Chemosensors, 9(9), p.264, (2021), (doi.org/10.3390/chemosensors9090264)
  6. P. Ibba, C. Tronstad, R. Moscetti, T. Mimmo, G. Cantarella, L. Petti, Ø. G. Martinsen, S. Cesco and P. Lugli, "Supervised binary classification methods for strawberry ripeness discrimination from bioimpedance data". Scientific reports, 11(1), pp.1-13, (2021), (doi.org/10.1038/s41598-021-90471-5)
  7. S. Cesco, V. Zara, A.F. De Toni, P. Lugli, A. Evans and G. Orzes, "The future challenges of scientific and technical higher education". Tuning Journal for Higher Education, 8(2), pp.85-117, (2021), (doi.org/10.18543/tjhe-8(2)-2021pp85-117)
  8. N. Maccaferri, P. Vavassori and D. Garoli, "Magnetic control of particle trapping in a hybrid plasmonic nanopore". Applied Physics Letters, 118(19), p.193102, (2021), (doi.org/10.1063/5.0046245)
  9. L. Singh, N. Maccaferri, D. Garoli and Y. Gorodetski, "Directional plasmonic excitation by helical nanotips". Nanomaterials, 11(5), p.1333, (2021), (doi.org/10.3390/nano11051333)
  10. L. Singh, Y. Gorodetski and D. Garoli, "Design and experimental investigation of a chiral plasmonic nanotaper". Metamaterials XIII (Vol. 11769, p. 1176913). International Society for Optics and Photonics, (2021), (doi.org/10.1117/12.2589907)
  11. G. Giovannini, H. Haick and D. Garoli, "Detecting COVID-19 from Breath: A Game Changer for a Big Challenge". ACS sensors, 6(4), pp.1408-1417, (2021), (doi.org/10.1021/acssensors.1c00312)
  12. A.N. Koya, X. Zhu, N. Ohannesian, A.A. Yanik, A. Alabastri, R. Proietti Zaccaria, R. Krahne, W.C. Shih and D. Garoli, "Nanoporous Metals: From Plasmonic Properties to Applications in Enhanced Spectroscopy and Photocatalysis". ACS nano, 15(4), pp.6038-6060, (2021), (doi.org/10.1021/acsnano.0c10945)
  13. G. Giovannini, D. Garoli, P. Rupper, A. Neels, R.M. Rossi and L.F. Boesel, "Metal-Modified Montmorillonite as Plasmonic Microstructure for Direct Protein Detection". Sensors, 21(8), p.2655, (2021), (doi.org/10.3390/s21082655)
  14. A. Spitaleri, D. Garoli, M. Schütte, H. Lehrach, W. Rocchia and F. De Angelis, "Adaptive nanopores: A bioinspired label-free approach for protein sequencing and identification". Nano Research, 14(1), pp.328-333, (2021), (doi.org/10.1007/s12274-020-3095-z)
  15. P. Ibba, M. Crepaldi, G. Cantarella, G. Zini, A. Barcellona, M. Rivola, M. Petrelli, L. Petti and P. Lugli, "Design and Validation of a Portable AD5933–Based Impedance Analyzer for Smart Agriculture". IEEE Access (2021), (doi.org/10.1109/ACCESS.2021.3074269)
  16. F.C. Loghin, A. Falco, F. Moreno-Cruz, P. Lugli, D.P. Morales, J.F. Salmerón and A. Rivadeneyra,"Facile Manufacturing of Sub-mm Thick CNT-Based RC Filters". Materials Letters, p.129939 (2021), (doi.org/10.1016/j.matlet.2021.129939)
  17. S. Cesco, V. Zara, A.F. De Toni, P. Lugli, G. Betta, A.C. Evans and G. Orzes, "Higher education in the first year of COVID-19: Thoughts and perspectives for the future". International Journal of Higher Education, 10(3), pp.285-294 (2021), (doi.org/10.5430/ijhe.v10n3p285)
  18. A. Gaiardo, D. Novel, E. Scattolo, M. Crivellari, A. Picciotto, F. Ficorella, E. Iacob, A. Bucciarelli, L. Petti, P. Lugli and A. Bagolini, "Optimization of a Low-Power Chemoresistive Gas Sensor: Predictive Thermal Modelling and Mechanical Failure Analysis". Sensors, 21(3), p.783 (2021), (doi.org/10.3390/s21030783)
  19. A. Falco, P.S. Sackenheim, F.J. Romero, M. Becherer, P. Lugli, J.F. Salmerón and A. Rivadeneyra, "Fabrication of low cost and low impact RH and temperature sensors for the internet of environmental-friendly things". Materials Science and Engineering: B, 267, p.115081 (2021), (doi.org/10.1016/j.mseb.2021.115081)
  20. Y. Ricci, A. Sorrentino, P. La Torraca, L. Cattani, M. Cotogno, G. Cantarella, L. Orazi, D. Castagnetti, P. Lugli, L. and Larcher, "Design and Fabrication of a Pillar-based Piezoelectric Microphone exploiting 3D-Printing Technology". IEEE Sensors Letters (2021), (doi.org/10.1109/LSENS.2021.3053209)
  21. S. Cesco, Y. Pii, L. Borruso, G. Orzes, P. Lugli, F. Mazzetto, G. Genova, M. Signorini, G. Brunetto, R. Terzano and G. Vigani, "A Smart and Sustainable Future for Viticulture Is Rooted in Soil: How to Face Cu Toxicity". Applied Sciences, 11(3), p.907 (2021), (doi.org/10.3390/app11030907)
  22. M.G. Pelizzo, A.J. Corso, G. Santi, R. Hübner, D. Garoli, D. Doyle, P. Lubin, A.N. Cohen, J. Erlikhman, G. Favaro and M. Bazzan, "Dependence of the damage in optical metal/dielectric coatings on the energy of ions in irradiation experiments for space qualification". Scientific reports, 11(1), pp.1-12 (2021). (doi.org/10.1038/s41598-021-82860-7)
  23. N. Maccaferri, G. Barbillon, A.N. Koya, G. Lu, G. Acuna and D. Garoli, "Recent advances on plasmonic nanocavities for single-molecule spectroscopy", Nanoscale Advances (2021), (doi.org/10.1039/D0NA00715C)
  24. N. Koya, X. Zhu, N. Ohannesian, A. Ali Yanik, A. Alabastri, R. Proietti Zaccaria, R. Krahne, W.-C. Shih, and D. Garoli, “Metamaterials based on nanoporous metals: plasmonic properties and applications in enhanced spectroscopy”, ACS Nano (2021) . In press

2020

  1. V. Toral, E. Castillo, A. Albretch, F.J. Romero, A. García, N. Rodríguez, P. Lugli, D.P. Morales and A. Rivadeneyra. "Cost-effective printed electrodes based on emerging materials applied to biosignal acquisition". IEEE Access, 8, pp.127789-127800 (2020), (doi.org/10.1109/ACCESS.2020.3008945)
  2. A. Falco, F.J. Romero, F.C. Loghin, A. Lyuleeva, M. Becherer, P. Lugli, D.P. Morales, N. Rodriguez, J.F. Salmerón and A. Rivadeneyra. "Printed and Flexible Microheaters Based on Carbon Nanotubes". Nanomaterials, 10(9), p.1879 (2020), (doi.org/10.3390/nano10091879)
  3. J.C. Costa,  A.P.Y.P. Kermani, G. Cantarella,  L. Petti, C. Vogt, A. Daus, S. Knobelspies, G. Tröster and N.S. Münzenrieder. "Long-Term Aging of Al2O3 Passivated and Unpassivated Flexible a-IGZO TFTs". IEEE Transactions on Electron Devices, 67(11), pp.4934-4939 (2020), (doi.org/10.1109/TED.2020.3026613)
  4. G. Cantarella, J. C. Costa, T. Meister, K. Ishida, C. Carta, F. Ellinger, P. Lugli, N. Münzenrieder and L. Petti. "Review of recent trends in flexible metal oxide thin-film transistors for analog applications". Flexible and Printed Electronics (2020), (doi.org/10.1088/2058-8585/aba79a)
  5. K. B. Saller, K. C., Liao, H. Riedl, P. Lugli, G. Koblmüller, J. Schwartz and M. Tornow. "Contact Architecture Controls Conductance in Monolayer Devices". ACS Applied Materials & Interfaces (2020), (doi.org/10.1021/acsami.0c08902)
  6. A. Douaki, B. Demelash Abera, G. Cantarella, B. Shkodra, A. Mushtaq, P. Ibba, A.K.M. Inam, L. Petti and P. Lugli. "Flexible Screen Printed Aptasensor for Rapid Detection of Furaneol: A Comparison of CNTs and AgNPs Effect on Aptasensor Performance". Nanomaterials, 10(6), p.1167 (2020), (doi.org/10.3390/nano10061167)
  7. N. Münzenrieder, I. Shorubalko, L. Petti, G. Cantarella, S. Bajramshahe, T. Meister, ... & G. Tröster. "Focused ion beam milling for the fabrication of 160 nm channel length IGZO TFTs on flexible polymer substrates". Flexible and Printed Electronics (2020), (doi.org/10.1088/2058-8585/ab639f)
  8. B. Shkodra, B.D. Abera, G. Cantarella, A. Douaki, E. Avancini, L. Petti, and P. Lugli, "Flexible and Printed Electrochemical Immunosensor Coated with Oxygen Plasma Treated SWCNTs for Histamine Detection". Biosensors, 10, 35 (2020), (doi.org/10.3390/bios10040035)
  9. P. Ibba, A. Falco, B. D. Abera, G. Cantarella, L. Petti and P. Lugli, “Bio-impedance and circuit parameters: An analysis for tracking fruit ripening”, Postharvest Biology and Technology 159 110978 (2020), (doi.org/10.1016/j.postharvbio.2019.110978)
  10. D. Garoli, A. J. Corso, J. I. Larruquert, L. V. Rodriguez De Marcos, R. Proietti Zaccaria, and M. G. Pelizzo, “Mirrors for space projects: degradation issues on the technology stability”, Appl. Sci. (2020), 10, 7538 (doi:10.3390/app10217538)
  11. A. Hubarevich, Jian-An Huang,  G. Giovannini, A. Schirato, Y. Zhao, F. De Angelis, N. Maccaferri, A. Alabastri, D. Garoli, "λ-DNA Through Porous Materials – Surface Enhanced Raman Scattering in a Simple Plasmonic Nanopore”, Journal of Physical Chemistry C (2020) (DOI: 10.1021/acs.jpcc.0c06165)

2019

  1. S. Teymouri, F. Loghin, M. Bobinger, Z. Guttenberg, & P. Lugli. "Transparent carbon nanotube electrodes for electric cell–substrate impedance sensing". MRS Communications, 9(4), 1292-1299 (2019). (doi.org/10.1557/mrc.2019.116)
  2. A. Falco, F. C. Loghin, M. Becherer, P. Lugli, J. Fernández Salmerón, & A. Rivadeneyra. "Low-cost gas sensing: dynamic self-compensation of humidity in CNT based devices". ACS sensors (2019). (doi.org/10.1021/acssensors.9b01095)
  3. A. Albrecht, J.F. Salmeron, M. Becherer, P. Lugli & A. Rivadeneyra. "Screen-Printed Chipless Wireless Temperature Sensor". IEEE Sensors Journal, 19(24), 12011-12015 (2019). (doi.org/10.1109/JSEN.2019.2940836)
  4. K.B. Saller, H. Riedl, P. Lugli, G. Koblmüller, & M. Tornow. "One-step transfer printing of patterned nanogap electrodes". Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena, 37(4), 040602 (2019). (doi.org/10.1116/1.5100560)
  5. E. Castillo, J. F. Salmerón, A. Falco, F. C. Loghin, F. J. Romero, P. Lugli, ... & A. Rivadeneyra. "An optimized measurement algorithm for gas sensors based on carbon nanotubes: optimizing sensor performance and hardware resources". IEEE Internet of Things Journal, 6(5), 9140-9146 (2019). (doi.org/10.1109/JIOT.2019.2928231)
  6. E. Stelmach, E. Jaworska, V. D. Bhatt, M. Becherer, P. Lugli, A. Michalska, & K. Maksymiuk. "Electrolyte gated transistors modified by polypyrrole nanoparticles". Electrochimica Acta, 309, 65-73 (2019). (doi.org/10.1016/j.electacta.2019.04.034)
  7. A. Rivadeneyra, M. Bobinger, A. Albrecht, M. Becherer, P. Lugli, A. Falco & J. F. Salmerón. "Cost-Effective PEDOT: PSS Temperature Sensors Inkjetted on a Bendable Substrate by a Consumer Printer". Polymers, 11(5), 824 (2019). (doi.org/10.3390/polym11050824)
  8. M. R. Bobinger, F. J. Romero, A. Salinas-Castillo, M. Becherer, P. Lugli, D. P. Morales, ... & A. Rivadeneyra. "Flexible and robust laser-induced graphene heaters photothermally scribed on bare polyimide substrates". Carbon, 144, 116-126 (2019). (doi.org/10.1016/j.carbon.2018.12.010)
  9. A. Lyuleeva, T. Helbich, M. Bobinger, B. Rieger, M. Becherer, P. Lugli & A. Rivadeneyra. "Functionalized and oxidized silicon nanosheets: Customized design for enhanced sensitivity towards relative humidity". Sensors and Actuators B: Chemical, 283, 451-457 (2019). (doi.org/10.1016/j.snb.2018.11.049)
  10. F. Loghin, A. Rivadeneyra, M. Becherer, P. Lugli, & M. Bobinger. "A Facile and Efficient Protocol for Preparing Residual-Free Single-Walled Carbon Nanotube Films for Stable Sensing Applications". Nanomaterials, 9(3), 471 (2019). (doi.org/10.3390/nano9030471)
  11. F. Loghin, A. Abdellah, A. Falco, M. Becherer, P. Lugli & A. Rivadeneyra. "Time stability of carbon nanotube gas sensors". Measurement, 136, 323-325 (2019). (doi.org/10.1016/j.measurement.2018.12.097)
  12. F. C. Loghin, A. Falco, J. F. Salmeron, P. Lugli, A. Abdellah & A. Rivadeneyra. "Fully Transparent Gas Sensor Based on Carbon Nanotubes". Sensors, 19(20), 4591 (2019). (doi.org/10.3390/s19204591)
  13. P. Sambo, C. Nicoletto, A. Pii. Y. Giro, F. Valentinuzzi, T. Mimmo, ... & R. Terzano." Hydroponic solutions for soilless production systems: Issues and opportunities in a smart agriculture perspective". Frontiers in plant science, 10 (2019). (doi.org/10.3389/fpls.2019.00923)
  14. A. Albrecht, M. Trautmann, M. Becherer, P. Lugli & A. Rivadeneyra. "Shear-Force Sensors on Flexible Substrates Using Inkjet Printing". Journal of Sensors (2019). (doi.org/10.1155/2019/1864239)
  15. Meister, K. Ishida, S.Knobelspies, G. Cantarella, N. Münzenrieder, G. Tröster, C. Carta and F. Ellinger, “5 to 31Hz 188µW Light-Sensing Oscillator with Two Active Inductors Fully Integrated on Plastic”, IEEE Journal of Solid State Circuits, 2019, (doi.org/10.1109/JSSC.2019.2914405)
  16. B. D. Abera, A. Falco, P. Ibba, G. Cantarella, L. Petti * and P. Lugli, “Development of Flexible Dispense-Printed Electrochemical Immunosensor for Aflatoxin M1 Detection in Milk”, MDPI Sensors 2019, 19, 3912, (doi.org/10.3390/s19183912)
  17. Niko Münzenrieder, Giuseppe Cantarella, Luisa Petti, “Fabrication and AC performance of flexible Indium-Gallium-Zinc-Oxide thin-film transistors”, ECS Transactions 90 (1), 55-63, 2019, (doi.org/10.1149/09001.0055ecst)
  18. Giuseppe Cantarella, Sudhir Kumar, Christian Vogt, Stefan Knobelspies, Alain Takabayashi, Jakub Jagielski, Niko Münzenrieder, Alwin Daus, Luisa Petti, Giovanni A Salvatore, Paolo Lugli, Chih-Jen Shih, Gerard Tröster, “Flexible green perovskite light emitting diodes”, IEEE Journal of the Electron Devices Society, 2019, (doi.org/10.1109/JEDS.2019.2913765)

2018

  1. M. Buonomo, N. Lago, G. Cantarella, N. Wrachien, M. Natali, F. Prescimone, E. Benvenuti, M. Muccini, S. Toffanin, and A. Cester, “Simple and accurate single transistor technique for parameters extraction from organic and inorganic thin film devices”, Organic Electronics, pages 376-383, 2018, (doi.org/10.1016/j.orgel.2018.08.008)
  2. A. Albrecht, M. Bobinger, J. Salmerón, M. Becherer, G. Cheng, P. Lugli, & A. Rivadeneyra. "Over-Stretching Tolerant Conductors on Rubber Films by Inkjet-Printing Silver Nanoparticles for Wearables". Polymers, 10(12), 1413 (2018). (doi.org/10.3390/polym10121413)
  3. S. Joshi, V. D. Bhatt, H. Rani, M. Becherer & P. Lugli. "Understanding the influence of in-plane gate electrode design on electrolyte gated transistor". Microelectronic Engineering, 199, 87-91 (2018). (doi.org/10.1016/j.mee.2018.07.019)
  4. M. Bobinger, S. Keddis, S. Hinterleuthner, M. Becherer, F. Kluge, N. Schwesinger, ... & A. Rivadeneyra. "Light and pressure sensors based on PVDF with sprayed and transparent electrodes for self-powered wireless sensor nodes". IEEE Sensors Journal, 19(3), 1114-1126 (2018). (doi.org/10.1109/JSEN.2018.2879122)
  5. M. Spellauge, F. C. Loghin, J. Sotrop, M. Domke, M. Bobinger, A. Abdellah, ... & H. P. Huber. "Ultra-short-pulse laser ablation and modification of fully sprayed single walled carbon nanotube networks". Carbon, 138, 234-242 (2018). (doi.org/10.1016/j.carbon.2018.05.074)
  6. B. Popescu, G. Csaba, D. Popescu, A. H. Fallahpour, P. Lugli, W. Porod & M. Becherer. "Simulation of coupled spin torque oscillators for pattern recognition". Journal of Applied Physics, 124(15), 152128 (2018). (doi.org/10.1063/1.5042423)
  7. P. Torraca, M. Bobinger, M. Servadio, P. Pavan, M. Becherer, P. Lugli & L. Larcher. "On the frequency response of nanostructured thermoacoustic loudspeakers". Nanomaterials, 8(10), 833 (2018). (doi.org/10.3390/nano8100833)
  8. J. Mock, M. Bobinger, C. Bogner, P. Lugli & M. Becherer. "Aqueous synthesis, degradation, and encapsulation of copper nanowires for transparent electrodes". Nanomaterials, 8(10), 767 (2018). (doi.org/10.3390/nano8100767)
  9. M. Bobinger, M. Haider, Y. Goliya, A. Albrecht, M. Becherer, P. Lugli, ... & J. Russer. "On the sintering of solution-based silver nanoparticle thin-films for sprayed and flexible antennas". Nanotechnology, 29(48), 485701 (2018). (doi.org/10.1088/1361-6528/aae0e0)
  10. A. Lyuleeva, A. Rivadeneyra, T. Helbich, P. Holzmüller, B. Rieger, P. Lugli & M. Becherer. "Surface Engineering of Two-Dimensional Hydrogenated Silicon Nanosheets for Tailored Applications". In Journal of Physics: Conference Series (Vol. 1092, No. 1, p. 012080). IOP Publishing (2018). (doi.org/10.1088/1742-6596/1092/1/012080)
  11. F. C. Loghin, A. Falco, A. Albrecht, J. F. Salmerón, M. Becherer, P. Lugli & A. Rivandeneyra. "A Handwriting Method for Low-Cost Gas Sensors". ACS applied materials & interfaces, 10(40), 34683-34689 (2018). (doi.org/10.1021/acsami.8b08050)
  12. P. La Torraca, M. Bobinger, P. Pavan, M. Becherer, S. Zhao, M. Koebel, ... & L. Larcher. "High efficiency thermoacoustic loudspeaker made with a silica aerogel substrate". Advanced Materials Technologies, 3(8), 1800139 (2018). (doi.org/10.1002/admt.201800139)
  13. S. Joshi, V. D. Bhatt, E. Jaworska, A. Michalska, K. Maksymiuk, M. Becherer, ... & P. Lugli. "Ambient Processed, Water-Stable, Aqueous-Gated sub 1 V n-type Carbon Nanotube Field Effect Transistor". Scientific reports, 8(1), 11386 (2018). (doi.org/10.1038/s41598-018-29882-w)
  14. J. Salmerón, A. Albrecht, S. Kaffah, M. Becherer, P. Lugli & A. Rivadeneyra. "Wireless Chipless System for Humidity Sensing". Sensors, 18(7), 2275 (2018). (doi.org/10.3390/s18072275)
  15. S. Joshi, V. D. Bhatt, E. Jaworska, M. Becherer, K. Maksymiuk, A. Michalska & P. Lugli. "Using Lipophilic Membrane for Enhanced‐Performance Aqueous Gated Carbon Nanotube Field Effect Transistors". physica status solidi (a), 215(11), 1700993 (2018). (doi.org/10.1002/pssa.201700993)
  16. M. Bobinger, P. La Torraca, J. Mock, M. Becherer, L. Cattani, D. Angeli, ... & P. Lugli. "Solution-processing of copper nanowires for transparent heaters and thermo-acoustic loudspeakers". IEEE Transactions on Nanotechnology, 17(5), 940-947 (2018). (doi.org/10.1109/TNANO.2018.2829547)
  17. B. F. Matarèse, P. L. Feyen, A. Falco, F. Benfenati, P. Lugli & J. C. deMello. "Use of SU8 as a stable and biocompatible adhesion layer for gold bioelectrodes". Scientific reports, 8(1), 5560 (2018). (doi.org/10.1038/s41598-018-21755-6)
  18. S. Filser, T. L. Maier, R. D. Nagel, W. Schindler, P. Lugli, M. Becherer & K. Krischer. "Photoelectrochemical reactivity of well-defined mesoscale gold arrays on SiO2/Si substrates in CO2-saturated aqueous electrolyte". Electrochimica Acta, 268, 546-553 (2018). (doi.org/10.1016/j.electacta.2018.02.018)
  19. S. Joshi, V. Bhatt, A. Märtl, M. Becherer & P. Lugli. "Regenerative, highly-sensitive, non-enzymatic dopamine sensor and impact of different buffer systems in dopamine sensing". Biosensors, 8(1), 9 (2018). (doi.org/10.3390/bios8010009)
  20. A. Albrecht, A. Rivadeneyra, M. Bobinger, J. B. Calia, F. C. Loghin, J. F. Salmeron, ... & A. Falco. "Scalable Deposition of Nanomaterial-Based Temperature Sensors for Transparent and Pervasive Electronics". Journal of Sensors, (2018). (doi.org/10.1155/2018/7102069)
  21. A. Lyuleeva, P. Holzmüller, T. Helbich, M. Stutzmann, M. S. Brandt, M. Becherer, ... & B. Rieger. "Charge transfer doping in functionalized silicon nanosheets/P3HT hybrid material for applications in electrolyte-gated field-effect transistors". Journal of Materials Chemistry C, 6(27), 7343-7352 (2018). (doi.org/10.1039/C8TC01484A)
  22. J. Mock, M. Bobinger, C. Bogner, P. Lugli & M. Becherer. "Aqueous synthesis, degradation, and encapsulation of copper nanowires for transparent electrodes". Nanomaterials, 8(10), 767 (2018). (doi.org/10.3390/nano8100767)
  23. M. Bobinger, V. Dergianlis, M. Becherer & P. Lugli. "Comprehensive synthesis study of well-dispersed and solution-processed metal nanowires for transparent heaters". Journal of Nanomaterials, (2018). (doi.org/10.1155/2018/7304807)
  24. A. Angı, M. Loch, R. Sinelnikov, J. G. Veinot, M. Becherer, P. Lugli & B. Rieger. "The influence of surface functionalization methods on the performance of silicon nanocrystal LEDs". Nanoscale, 10(22), 10337-10342 (2018). (doi.org/10.1039/C7NR09525B)
  25. A. Falco, A. Rivadeneyra, F. C. Loghin, J. F. Salmeron, P. Lugli & A. Abdelhalim. "Towards low-power electronics: Self-recovering and flexible gas sensors". Journal of Materials Chemistry A, 6(16), 7107-7113 (2018). (doi.org/10.1039/C7TA11311K)